Have you left your Treo somewhere and anxious about it? In that same situation, do you want to lock, reset, send SMS, view the call log and know other system status remotely? Do you want to bring only 1 mobile phone instead of 2 but still have control of the other? Have you forgotten your system password and no other choice but to hard reset to get in? Have you ever wondered how you can remotely control your Treo by using the power of SMS? You can with SMS Commander!

SMS Commander is a first in remote control commanding of your Treo by using the power of SMS.. Just send a text message containing the command and your password and you'll have a full control of your Treo anytime, anywhere. Everything can be set by request (on demand). This application could also be used to SPY or MONITOR your kin, friend, family, or co-worker's Treo FOR FUN (highly discouraged), and the SMS commands will not appear on the recipient's Treo. Please be aware such activity might be illegal in your country. We suggest you to check local laws before using SMS Commander for such case. The developer will not be liable to any outcome on such usage of this application.

If someone has changed the SIM card on your Treo, this will not change the performance of your control over your device. SMS messages will still be forwarded to the phone number configured as the destination of the program, and you will still have the ability to to lock the phone, receive messages, along with the new phone number of the SIM, etc.

FREE Radio ON/OFF application when you register SMS Commander.This application will turn the radio ON when you reset your Treo. Really handy when you use the reset SMS command.

IMPORTANT: Failure to follow the installation instructions could lead to improper operations of the application.

The default password is 00000. It is highly recommended to change your password upon installation.

FEATURES:
* Forward received SMS to any other mobile phone
* Remotely Compose, Reply and Send SMS using another mobile phone
* Everything can be set by request (on demand)
* Install, setup and forget
* Option to save to inbox all received SMS
* Remotely view missed, incoming, outgoing call logs
* Remotely lock your Treo
* Remotely remove, change, and clear the system password
* Remotely check the battery level
* Remotely check the radio signal strength
* Remotely reset your Treo
* Remotely search contact from your address book
* Remotely enable/disable SMS forwarding
* Remotely change the destination number
* Remotely enable/disable saving to inbox
* Remotely check if your Treo is plugged in
* Remotely check the heap and storage size of RAM
* Remotely check the external card info
* Remotely set SMS Commander password
* Remotely show/hide SMS Commander
* The software starts up automatically upon phone boot
* Information about the original message sender is included in the forwarded message content
* Only SMS is forwarded. MMS or EMS is not supported
* FREE Radio application which can turn radio after reset
* Receive the new number and the forwarded SMS even when the SIM card has been changed
Compatibility: Treo (CDMA or GSM) 600, 650, 680, 700p, 755p devices

Updated Description:

v1.08 - June 25, 2008
1. Added cmd:dial command. Remotely dial any phone number.
2. Added cmd:radiooff command. Remotely turn the radio off.
3. Added option to breakdown long SMS to individual 160-character SMS. A must have for Sprint network subscribers.
4. Fixed minor Hide password option bug.
5. Improved handling of commands if other mobile phone has been used and the phone number is different from the Destination Number.
6. Updated the Radio application to version 2.0
7. Updated cmd:help

v1.07 (beta):
- NEW: Added cmd:dial or any-number-remote-dialing. Most of the networks have an access number where you can check the call/SMS balance. Now, you can dial this access number even while you are away from your Treo. And then automatically forward the SMS to another mobile phone (if SMS forwarding is enabled). This feature is not designed to listen to someone's private conversation without them knowing. We highly discourage EAVESDROPPING through SMS Commander. Please check your local laws about this. Suntzu Software will not be liable for any unlawful use of this software.
Example: To initiate a call remotely, just send cmd:dial [phone number to dial] [your password].cmd:dial +14851234567 mypassword.
- NEW: Added cmd:radiooff or remote turn radio off. Requires Radio version 2.0.
- NEW: Added option to breakdown long SMS to individual 160-character SMS. This is designed for Sprint users who are experiencing forwarding a garbled SMS if it exceeds 160 characters long.
- FIXED: Minor Hide password bug.
- UPDATED: cmd:help. Added cmd:dial and cmd:radiooff remote commands.

v1.06 - November 21, 2007
- Added support for the Palm Centro
- Added command to enable, disable and set call forwarding remotely.
- Added cmd:callforwardingstatus command. To GET the current call forwarding setting.
- Added cmd:callforwarding command. To SET the call forwarding.
- Fixed the bug when exiting SMS commander if set as a Preference.
- Updated cmd:help

v1.02:
- Option to hide the password
- Added cmd:hardreset command which will remotely wipe out the internal memory (RAM)
- Added cmd:help command for all SMS Commander users who have short-term memory. It sends back the available remote commands.
- Added OTA update / Check for Update form.
- Change from release.history.txt to smscommander-release.htm